HEX
Server: LiteSpeed
System: Linux venus 5.15.0-153-generic #163-Ubuntu SMP Thu Aug 7 16:37:18 UTC 2025 x86_64
User: axxoncom (1007)
PHP: 8.3.19
Disabled: exec,system,passthru,shell_exec,proc_close,proc_open,dl,popen,show_source,posix_kill,posix_mkfifo,posix_getpwuid,posix_setpgid,posix_setsid,posix_setuid,posix_setgid,posix_seteuid,posix_setegid,posix_uname
Upload Files
File: /home/axxoncom/Maildir/cur/1737972342.M24019P3404628.platinum.scnservers.net:2,
Return-path: <>
Envelope-to: axxoncom@okashafurniture.com
Delivery-date: Mon, 27 Jan 2025 15:35:42 +0530
Received: from mail by platinum.scnservers.net with local (Exim 4.97.1)
	id 1tcLzy-0000000EHhE-02k0
	for axxoncom@okashafurniture.com;
	Mon, 27 Jan 2025 15:35:42 +0530
X-Failed-Recipients: personalid181@gmail.com
Auto-Submitted: auto-replied
From: Mail Delivery System <Mailer-Daemon@platinum.scnservers.net>
To: axxoncom@okashafurniture.com
References: <jHfOmYW1lbgaGAADItK03oBskNHBzzII1Sq6ZDBUE@okashafurniture.com>
Content-Type: multipart/report; report-type=delivery-status; boundary=1737972342-eximdsn-1708968874
MIME-Version: 1.0
Subject: Mail delivery failed: returning message to sender
Message-Id: <E1tcLzy-0000000EHhE-02k0@platinum.scnservers.net>
Date: Mon, 27 Jan 2025 15:35:42 +0530

--1737972342-eximdsn-1708968874
Content-type: text/plain; charset=us-ascii

This message was created automatically by mail delivery software.

A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:

  personalid181@gmail.com
    host relay.mailbaby.net [67.211.215.74]
    SMTP error from remote mail server after end of data:
    550 This message was classified as rSPAM and may not be delivered https://mail.outboundspamprotection.com/mailinfo?id=194a7379b4800060c6&user=mb17987

--1737972342-eximdsn-1708968874
Content-type: message/delivery-status

Reporting-MTA: dns; platinum.scnservers.net

Action: failed
Final-Recipient: rfc822;personalid181@gmail.com
Status: 5.0.0
Remote-MTA: dns; relay.mailbaby.net
Diagnostic-Code: smtp; 550 This message was classified as rSPAM and may not be delivered https://mail.outboundspamprotection.com/mailinfo?id=194a7379b4800060c6&user=mb17987

--1737972342-eximdsn-1708968874
Content-type: message/rfc822

Return-path: <axxoncom@okashafurniture.com>
Received: from axxoncom by platinum.scnservers.net with local (Exim 4.97.1)
	(envelope-from <axxoncom@okashafurniture.com>)
	id 1tcLzv-0000000EHZO-0TLX
	for personalid181@gmail.com;
	Mon, 27 Jan 2025 15:35:39 +0530
To: personalid181@gmail.com
Subject: =?us-ascii?Q?[Okasha_Furniture]_Please_moderate:_"Large_Doub?=
 =?us-ascii?Q?le_Layer_Cardboard_Packing_Moving_Shipping_Stor?=
 =?us-ascii?Q?age_Box_(45x45x70_cms)_-_1_Count"?=
Date: Mon, 27 Jan 2025 10:05:39 +0000
From: WordPress <wordpress@okashafurniture.com>
Message-ID: <jHfOmYW1lbgaGAADItK03oBskNHBzzII1Sq6ZDBUE@okashafurniture.com>
X-Mailer: PHPMailer 6.9.2 (https://github.com/PHPMailer/PHPMailer)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8

A new comment on the post "Large Double Layer Cardboard Packing Moving Shipping Storage Box (45x45x70 cms) - 1 Count" is waiting for your approval
https://okashafurniture.com/product/large-double-layer-cardboard-packing-moving-shipping-storage-box-45x45x70-cms-1-count/

Author: EQiblyced (IP address: 109.248.12.187, 109.248.12.187)
Email: taanakeif@gazeta.pl
URL: 
Comment: 
  Employing the Balanset-1A System   
 
  Preparing the Necessary Tools   
 
  vibration sensors, optical speed sensor, magnetic base, software package, and included accessories.   
   Set up the instrument and connect it to your computer via USB. Verify that the software is correctly installed.     
 
 
   Mounting the Sensors   
 
  Fix the accelerometers securely to the machine's structure in locations where vibrations are most prominent, ideally near the bearings.   
   Direct the laser speed sensor towards the rotor and affix reflective tape to the rotor surface to facilitate phase angle measurement.   
 
 
 Launching the Software   
 
   Open the Balanset application on your PC.   
  Configure the software for either single-plane or two-plane balancing, based on the rotor's characteristics and the desired outcome.   
 
 
  Taking Baseline Vibration Readings   
<a href="https://vibromera.eu/wp-content/uploads/2024/11/2-Camera_01.png" rel="nofollow ugc"> 
 
</a> 
 
   Bring the rotor to its normal operating rotational frequency.   
   The program will record the vibration amplitude, rpm, and phase, providing a baseline measurement of the existing imbalance.   
 
 
 Attaching the Trial Weight   
<a href="https://vibromera.eu/wp-content/uploads/2024/11/3-Camera-2_01.png" rel="nofollow ugc"> 
 
</a> 
 
   Stop the rotor and attach a trial weight at a specific location on the rotor. The weight's mass can be specified within the software (e.g., in grams).     
  Run the rotor again, allowing the software to measure the effects of the trial weight on vibration and phase.   
 
<a href="https://vibromera.eu/wp-content/uploads/2024/11/5-Camera_01.png" rel="nofollow ugc"> 
 
</a> 
 
 
 Calculating the Correction Weight    
 
  The software uses the measured values to automatically compute the necessary compensating weight's magnitude and placement angle.   
   The results of the calculation are shown both numerically and visually through charts and graphs.   
 
<a href="https://vibromera.eu/wp-content/uploads/2024/02/Bs1ManualEngV156-May2023-10448629.png" rel="nofollow ugc"> 
 
</a> 
 
 Attaching the Corrective Mass   
 
  Attach the computed compensating weight to the rotor as indicated by the software's output.   
   If necessary, perform intermediate checks to verify that the imbalance is being reduced.     
 
<a href="https://vibromera.eu/wp-content/uploads/2024/11/1-Camera-2_01.png" rel="nofollow ugc"> 
 
</a> 
 
  Final Check and Balance Confirmation   
 
   Once the corrective weight is in place, restart the rotor and measure the remaining vibration amplitude.   
   If the vibration level is within acceptable limits (according to ISO 1940), the balancing is complete.     
   Should the vibration still be excessive, repeat the balancing steps, making further adjustments to the corrective weight as needed.   
 
 
 Creating a Balancing Report   
 
  The program stores the balancing data, allowing you to generate and print a comprehensive report including vibration measurements, corrective weight details, and its angular placement.   
 
 
 Concluding Steps and Verification   
 
  Ensure all applied weights and attached sensors are firmly fixed in their designated positions.   
   Check that the rotor's rotation is smooth and free from undue noise or vibration.   
   In cases where the rotor is integrated into a more complex system, ensure the correct operation and interaction of all related components.   
 
 
  Following this procedure enables accurate balancing, minimizes vibration, and prolongs the service life of the equipment.   
 
 
 
 
Instagram: https://www.instagram.com/vibromera_ou/ 
Youtube : https://youtu.be/guA6XJ-ArZM?si=vmkuX7RILzKBl0zL  
Our website about  <a href="https://vibromera.eu  
"> Air compressor balancing </a> 
Machinio: https://www.machinio.com/listings/98380186-portable-balancer-vibration-analyzer-balanset-1a-full-kit-in-portugal 
Facebook: https://www.facebook.com/marketplace/item/350151228150722

Approve it: https://okashafurniture.com/wp-admin/comment.php?action=approve&c=1091#wpbody-content
Trash it: https://okashafurniture.com/wp-admin/comment.php?action=trash&c=1091#wpbody-content
Spam it: https://okashafurniture.com/wp-admin/comment.php?action=spam&c=1091#wpbody-content
Currently 1,090 comments are waiting for approval. Please visit the moderation panel:
https://okashafurniture.com/wp-admin/edit-comments.php?comment_status=moderated#wpbody-content


--1737972342-eximdsn-1708968874--